Add-on services for a home service business, done honestly
I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn. We sell flat rates and never upsell, but we do offer fixed-price fixes for real problems we find. Here's how that works at the job.
By Eyal Malka, owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 20, 2026
Add-on services in a home service business work best when they are boring: a short list of parts and fixes with fixed prices you set in advance, offered only when you find a real problem, shown to the customer with a photo, and left for them to decide. If they say yes, it goes on the bill and you collect before you leave. If they say no, that’s the end of it.
I’m Eyal Malka. I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn, and I built VentCRM to run it. Here is how I think about add-ons, and how the system handles them at the job.
Add-ons are not upselling
Vent Pro NYC sells flat-rate pricing, and we promise customers there is never an upsell. That promise and add-ons can live together, but only if you are strict about what an add-on is.
An upsell is a pitch: something you push because it’s good for your ticket. An add-on, the way I use the word, is a fixed-price fix for a problem you actually found while doing the job the customer booked. The vent cap outside has no bird guard and there’s nesting material in the duct. The transition duct behind the dryer is crushed foil. Those are real problems. The customer would want to know about them whether or not you can fix them.
The test I use: if I wouldn’t mention it to a neighbor for free, I don’t mention it to a customer for money.
Decide the prices before you’re standing in the house
The worst moment to come up with a price is in someone’s laundry room while they watch you think. You guess high and feel bad, or guess low and lose money, and either way the customer can tell it was made up on the spot.
So set it all in advance. Make a short list of the problems you run into often, and give each fix one fixed price that covers the part, your time and a fair margin. For a dryer vent business that list might include:
- Replacing a crushed or foil transition duct with a proper one.
- Installing a bird guard or replacing a broken exterior vent cap.
- Removing a bird nest from the duct.
- A second dryer or a second vent run at the same address.
Some jobs vary too much to price ahead of time. Those aren’t tap-and-charge add-ons; quote them separately. If you’re still working out your base prices, start with how to price dryer vent cleaning.
In VentCRM, these live in your Products & Services catalog. Each item is marked as a service or a product and carries its own fixed price and whether it’s taxable. On the phone they show up grouped as Services and Parts & upgrades.
Show the problem with a photo
Most customers never look behind their dryer or up at the vent on the outside wall. Telling them “your transition duct is crushed” means very little. Showing them a photo of it, on your phone, right there, means a lot.
I take the photo, show it, explain in one or two sentences what it does to airflow or what could happen, give the fixed price, and stop talking. No “today only,” no pressure. A customer who says “not now” is still a customer, and they’ll remember that you were straight with them.
On the visit screen in VentCRM, each photo can be tagged before, after, during, issue or general, and you can type a short note under it. Before and after photos show on the customer’s invoice page as proof of the work. The during and issue shots stay internal, so you keep a record of what you found without cluttering the receipt. I go deeper on proof in airflow readings and photo proof.
Let the customer decide, then add it in a few taps
Once the customer says yes, adding it should take seconds. If it takes you five minutes of typing, you’ll start skipping it, or you’ll charge it wrong.
VentCRM gives you two ways, depending on how you want it billed:
- On the same bill. From the invoice screen on your phone, tap Add item and pick the fix from your catalog. It goes on as a new line at its catalog price, and the totals and tax are recalculated on the server.
- As its own charge. The Add-ons section on the visit screen opens a tap menu of your catalog. Tap the items, adjust quantities, check the subtotal, tax and total, and charge. That creates a separate invoice on the same job, ready to collect.
Either way, the price comes from your catalog, not from what you type at the door. On the visit-screen charge, the phone only sends which items and how many; the server looks up the prices itself. Sales tax is figured from the state of the service address. Nobody has to remember a number or do math in front of the customer.
Get paid before you leave
The add-on is part of today’s visit, so collect for it today. From the add-on charge in VentCRM you can:
- Open a secure card checkout on your phone through Stripe and hand the phone to the customer.
- Text the customer a payment link they can pay from their own phone.
- Record cash or a check on the spot.
Zelle and Venmo payments can be recorded against an invoice too. And if the customer wants to pay later, close the sheet: the invoice is saved and stays on the job. Card payments run through your own Stripe account. The full on-site routine is in on-site invoicing for home service businesses.
What I don’t do
- I don’t offer a fix for a problem I didn’t find.
- I don’t change a price because the house looks expensive.
- I don’t bring it up twice after a no.
- I don’t promise a part will fix something it won’t. A bird guard keeps birds out; it doesn’t fix a long duct run.
The same goes if you have a tech. If you pay per job, my advice is to keep the pay tied to doing the work right, not to how much gets added. More on that in paying a technician per job.
Does it pay off?
I don’t have a clean number to give you, and I’d be wary of anyone who does. What I can say is the reasoning. You are already at the house, with your tools out, looking at the problem. Fixing it now saves the customer a second visit and saves you a second drive. If you want to see what add-ons do to your own margins, track the profit per job rather than just revenue; I wrote about that in profit per job.
What to look for in software for on-site add-ons
- A catalog of fixed-price services and parts you set up once.
- A fast tap menu on the phone, not a blank form.
- Prices pulled from the catalog, not typed by hand.
- Tax worked out for you from the service address.
- Photos tied to the job so you can show the problem.
- Card, payment link, cash and check, all from the same screen.
VentCRM is the system I run Vent Pro NYC on, built for small dryer vent and home service shops. You can read more on the dryer vent cleaning software page, and the cost is on the pricing page.
Try it yourself
Open a job in the free live demo, tap into the add-ons menu and walk through charging a part. It’s a fictional company, and there’s no signup.
Common questions
- What's the difference between an add-on and an upsell?
- An upsell is a pitch for something you want to sell. An add-on, done honestly, is a fixed-price fix for a real problem you found on the job, like a missing bird guard or a crushed transition duct. The customer decides, with no pressure.
- How should I price add-on parts and fixes?
- Set one fixed price for each common fix before you're at the job, covering the part, your time and a fair margin. Jobs that vary too much should be quoted separately, not charged from a menu.
- Should an add-on go on the same invoice?
- It can. VentCRM lets you add a catalog item as a new line on the invoice you're about to collect, or charge add-ons as a separate invoice on the same job from the visit screen.
- How do I collect payment for an add-on on site?
- In VentCRM you can open a Stripe card checkout on your phone, text the customer a payment link, or record cash or a check. Zelle and Venmo can be recorded against an invoice too.
- Do photos help when offering an add-on?
- Yes. A photo of the actual problem explains it better than words. In VentCRM, before and after photos also appear on the customer's invoice page, while issue photos stay internal.