How to price dryer vent cleaning: flat rate vs hourly

I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn. This is how I think about pricing a vent job, and a worksheet to build your own price from your own costs.

By , owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 6, 2026

Here is the short answer on how to price dryer vent cleaning: work out what one job really costs you, add the margin you need to stay in business, and sell it as a flat rate the customer knows before you arrive. At Vent Pro NYC, my family’s company in Brooklyn, a standard dryer vent cleaning is $229.99, $249.99 or $299.99 depending on the zone the home is in. Those prices are public, and the customer pays exactly that. The rest of this post is how I got there and how you can build your own numbers.

Flat rate, hourly, or per foot: which pricing model works?

There are three common ways to price a vent job. I’ve thought about all of them over 12 years in the trade.

Hourly

Hourly feels fair to the operator because you never lose money on a long job. Customers hate it. They can’t compare you to anyone before you show up, and every minute you spend on the roof feels like their meter running. Hourly also punishes you for getting faster. After a few years your best jobs pay you the least.

Per foot

Per-foot pricing tracks the real work better, since a long run with several turns takes more effort than a short straight one. The problem is that nobody knows their vent length. You end up quoting a range on the phone and a real number in the laundry room, and that gap is where trust goes to die.

Flat rate

A flat rate is one price for the standard job, set in advance. The customer can book online without calling. You get paid for being good and fast. The risk sits with you: a hard job pays the same as an easy one, so the flat price has to be built on your average job, not your best one. That’s the model I chose, and I’d choose it again.

Why Vent Pro NYC prices by zone

Travel is the cost most new operators forget. In New York, two jobs that take the same time on site can have very different days around them: parking, bridges, tolls, traffic, the walk from wherever you finally found a spot. So instead of one citywide price, Vent Pro NYC uses three flat rates, $229.99, $249.99 and $299.99, keyed to the zone the home is in.

Zones keep the promise simple. The customer still gets one price before they book. You just stop pretending that a job down the block costs you the same as a job an hour away. If you serve a small area, one price may be enough. If your area is spread out, draw two or three zones around your base and price each one from its real travel cost.

A cost-per-job worksheet (use your numbers, not mine)

I won’t give you an “industry average” price. I haven’t seen one I could verify, and your costs are not my costs. Here’s the worksheet I’d use instead. Fill in each letter from your own books.

  1. L = labor per job. Hours on site plus drive time, times what that hour costs you (your own pay counts, even if you are the only tech).
  2. V = vehicle per job. Fuel, tolls, parking and wear, averaged over a normal week of jobs.
  3. M = materials per job. Brush heads, foil tape, clamps, replacement duct sections, and anything you leave behind.
  4. O = overhead per job. Monthly fixed costs (insurance, phone, software, marketing, tool replacement) divided by the jobs you actually do in a month.
  5. P = payment processing. Whatever your card processor charges on the final price.
  6. R = callback reserve. A small amount per job to cover the return visits you’ll do for free.

Your true cost per job is L + V + M + O + P + R. Then decide the margin you need. If you want a margin of G (as a share of the price), your floor price is cost ÷ (1 − G). Do this once per zone, since L and V change with distance. Round to a price you’re comfortable saying out loud, and check it against what your area will pay. If the floor comes out above what anyone will pay, the fix is usually in O (too few jobs a month) or L (too much drive time), not in the price.

One more thing: use your slow-month job count for O, not your best month. Pricing off the busy season is how operators end up broke in February.

Deposits protect the price

A flat rate only works if the slot you hold actually turns into a job. Online bookings at Vent Pro NYC take a $50 non-refundable deposit through Stripe, credited to the customer’s invoice. Cancel inside 12 hours and the deposit is forfeited. Customers can reschedule themselves when it’s more than 24 hours out, so honest customers rarely lose anything. I wrote more about the rules and the wording in booking deposits for home service businesses.

Never upsell on site

This is the part I care about most. Vent Pro NYC’s promise is a flat rate and never an upsell. The tech does the job that was booked, at the price that was quoted. If something is actually wrong, like a crushed duct or a vent that doesn’t meet code (in New York City that’s the NYC Mechanical Code, §504), we explain it, show the photo, and let the customer decide later. No pressure in the laundry room.

It costs you some add-on revenue on the day. It earns you something worth more: customers who trust the price, book again next year, and tell their neighbors. If you want to offer more than one level of service, do it up front with a written quote, not at the dryer. I cover how in good, better, best quotes.

Put the price where customers can see it

A flat rate does its best work on your website. When the price is on the booking page, the customer who books has already agreed to it. There is no awkward conversation at the end of the job. The software I built for my own company, VentCRM, takes online bookings with the $50 deposit, then turns the finished job into an invoice on site. You can poke at it in the free live demo, or read what dryer vent cleaning software actually needs to do. Its own price is on the pricing page, flat, like everything else here.

Review your prices once a year

Costs move. Fuel, tolls, insurance and parts all go up. Once a year, rerun the worksheet with the last twelve months of real numbers. If your floor has crept toward your price, raise the price for new bookings and say so plainly. Customers who got honest flat pricing from you last year tend to accept an honest increase this year.

Common questions

Should I charge hourly or a flat rate for dryer vent cleaning?
I use a flat rate. Customers can compare and book without a phone call, and you get paid for working fast. Build the flat price on your average job, not your easiest one.
What does Vent Pro NYC charge for dryer vent cleaning?
Vent Pro NYC's standard dryer vent cleaning is a flat $229.99, $249.99 or $299.99, depending on the zone the home is in. The customer pays the quoted price, with no upsell on site.
What is the average price of dryer vent cleaning?
I don't quote an average because I haven't seen one I could verify, and your costs differ from mine. Price from your own cost per job plus the margin you need.
Should I take a deposit for dryer vent cleaning bookings?
Vent Pro NYC takes a $50 non-refundable deposit on online bookings, credited to the invoice. Cancellations inside 12 hours forfeit it, and customers can reschedule themselves more than 24 hours ahead.

Get your own VentCRM

Sign up online in a few minutes — no sales call. Pay the $750 setup and first month, then $129/month, no contract. Tell me about your business and I’ll email you when your system is ready. Want to look first? Open the live demo — you’re signed in automatically, no email asked.

Talk to Eyal

Rather talk before you pay? Call or text me at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

VentCRM is operated by Vent Pro NYC, Inc. That’s the name you’ll see on the secure Stripe checkout page.

Questions about the app or signing in? Customer service: call or text the owner at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

Keep reading