Dryer Vent Airflow Test Before and After Cleaning

Two airflow readings and a few photos tell a customer more than “all done” ever will. Here’s how I take readings I can honestly compare, and how they end up on the customer’s receipt.

By , owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 6, 2026

A dryer vent airflow test before and after cleaning is the simplest proof you can give a customer that the job made a difference. Run the dryer on a no-heat setting, hold an anemometer square against the exterior vent hood, write down the reading in feet per minute (FPM), clean the vent, then take the second reading the exact same way. Put both numbers, plus before and after photos, on the customer’s receipt. That beats any verbal “all done, you’re good.”

I’m Eyal Malka, owner of Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn. I’ve been in this trade for 12 years, and I built VentCRM so that the readings and photos I take on the job end up in front of the customer without extra paperwork.

Why measure airflow at all?

From the laundry room, a clean vent and a clogged vent look the same. The customer can’t see inside the duct, they can’t see the roof, and they weren’t watching when the lint came out. If all they get is you saying “it was pretty bad,” they have to take your word for it.

Two numbers change that conversation. A before reading and an after reading, taken the same way, show the change in a form anyone can understand. It also keeps me honest. If the after number barely moved, something else is going on, like a crushed transition hose, a stuck damper or a run that’s too long, and I’d rather find that out on site than get a call next week.

How to do a dryer vent airflow test before and after cleaning

The tool is a handheld vane anemometer. The technique matters more than the brand. What you’re after is two readings you can honestly compare, so the conditions have to match.

  1. Empty the lint trap and put the screen back in. Run the test the same way both times, screen in.
  2. Run the dryer on air-only or no heat, empty. Hot, moist air is harder on some meters and the numbers wander more. Pick one setting and use it for both readings.
  3. Give it a minute for the flow to settle before you read anything.
  4. Measure at the exterior hood. Hold the vane square to the outlet, centered, as close to the same spot as you can. If the hood has flaps, note whether they open fully.
  5. Watch the reading for several seconds and record the steady value, not the spike. If your meter averages, use the average.
  6. Write down the conditions: setting, where you held it, anything unusual. Then clean, reconnect everything, and repeat the exact same steps for the after reading.

If you can’t reach the exterior hood safely, measure somewhere you can reach both times and say so on the job notes. A consistent reading at a second-best spot is more useful than an inconsistent one at the ideal spot.

What is a good FPM reading?

I don’t publish a universal “good” number, and I’d be careful with anyone who does. Dryer models, vent length, the number of turns, the hood style and the meter itself all move the reading. My own rule of thumb is to judge the job by the before and after on the same dryer, measured the same way, and to treat a small improvement as a reason to keep looking rather than a reason to pack up. Check your dryer manufacturer’s installation instructions for the venting limits on that specific model.

Photos and video: proof the customer can see

Numbers convince the engineer type of customer. Photos convince everyone else. On every job I try to capture:

  • The exterior hood before, especially if lint is visible.
  • What came out of the vent, on a tarp or in the bag.
  • The connection behind the dryer, before and after.
  • The hood after, clean and with the flaps moving.
  • A short video of the hood with the dryer running, if the flow is visibly better.

Take them with the same phone you run the job on. Anything that requires you to transfer files later won’t happen on a busy day.

Putting the proof on the receipt

This is where most shops lose it. The photos sit in the technician’s camera roll and the reading is written on a piece of cardboard in the truck. The customer never sees either.

In VentCRM, the before and after airflow readings in FPM, the photos and the video all attach to the job, and they show on the customer’s receipt, the link they open from their texts with no login. The airflow section shows both readings and a badge with how many times more airflow they got after the cleaning, in plain terms a homeowner understands.

That receipt does three jobs at once. It answers “what did I pay for?” It gives the customer something to show their spouse or landlord. And it’s a natural lead-in to the review request that goes out after they pay, which I wrote about in how to get Google reviews for a home service business.

Why proof beats “all done”

  • It justifies the price without a speech. If you charge a fair flat rate, the receipt shows what the customer got for it. I go into pricing in how to price dryer vent cleaning.
  • It protects you. If a customer calls months later with a problem, you have dated photos and readings from the visit.
  • It sets up next year. When the annual reminder goes out, last year’s before number is a reason to book again. More on that in annual service reminders for customers.
  • It’s honest. If a vent wasn’t that bad, the numbers say so too. Customers trust a company that shows them the real reading.

See it before you build your own process

Open the free live demo on your phone and run a visit from start to finish. It’s a fictional company and needs no signup. For the full day’s workflow around it, read what dryer vent cleaning software actually needs to do.

Common questions

What tool do I need for a dryer vent airflow test?
A handheld vane anemometer that reads in feet per minute (FPM). The technique matters more than the brand: same dryer setting, same spot, same way, before and after.
Where should I take the airflow reading?
At the exterior vent hood, with the vane square to the outlet and centered. If you can’t reach it safely, use another spot you can reach both times and note it on the job.
What is a normal dryer vent FPM reading?
I don’t use a universal number, because dryer model, vent length, turns, hood style and the meter all change it. I judge the job by before versus after on the same dryer, measured the same way.
Can customers see the readings and photos?
In VentCRM, yes. Before and after airflow readings, photos and video attach to the job and show on the customer’s receipt, which they open from a link in their texts with no login.

Get your own VentCRM

Sign up online in a few minutes — no sales call. Pay the $750 setup and first month, then $129/month, no contract. Tell me about your business and I’ll email you when your system is ready. Want to look first? Open the live demo — you’re signed in automatically, no email asked.

Talk to Eyal

Rather talk before you pay? Call or text me at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

VentCRM is operated by Vent Pro NYC, Inc. That’s the name you’ll see on the secure Stripe checkout page.

Questions about the app or signing in? Customer service: call or text the owner at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

Keep reading