Service Agreement for a Home Service Business: What to Include

A one-page agreement, signed on the customer’s phone before the visit, settles the hard questions while they’re still easy. Here’s what I put in mine and how I keep a record of exactly what each customer signed.

By , owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 20, 2026

Yes, a small home service business should have every customer sign a short service agreement before the work starts. One page, plain words: what you’ll do, what you won’t, your cancellation and deposit rule, how you handle photos, and what your guarantee covers if you offer one. Send it as a link they can sign on their phone, and keep a copy of the exact wording each customer signed.

I’m Eyal Malka. I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn, and I built VentCRM to run it. Here is why I ask every customer to sign, what I put in the agreement, and how the signing works in the system.

Why have a service agreement at all?

Most of my visits go fine without anyone reading a word of fine print. The agreement isn’t for those. It’s for the handful of visits where something is unclear: the customer expected a repair you don’t do, a cancellation happens an hour before you arrive, or there’s a crack in a vent pipe that was there long before you showed up.

In every one of those moments, it helps a lot when the customer already read the answer and agreed to it. You’re not arguing from memory about what you said on the phone. You’re pointing at something both of you saw before the visit.

I’m not going to tell you it prevents a certain number of disputes, because I haven’t counted them in a way I’d trust. What I can say is that it moves the hard conversations to before the job, when they’re easy, instead of after.

What a home service agreement should cover

Keep it short enough that people actually read it on a phone. My agreement covers these general areas, and I’d start any operator with the same list:

  • Scope. What you’ll do on the visit, in plain language. Not a sales pitch. Just the work.
  • What you won’t do. The things customers sometimes assume are included and aren’t, and your right to refuse work that isn’t safe to do.
  • Pre-existing conditions. Damage, wear or problems that were there before you arrived. Say that you’ll document what you find.
  • Pricing and add-ons. How the price is set and how anything extra gets approved before you do it.
  • Cancellation and deposit. How much notice you need and what happens to a deposit if they cancel late. I wrote more about this in booking deposits for home service businesses.
  • Photos. That you take before-and-after photos, why, and whether you’ll ever use them publicly. Give people a simple way to say no to public use.
  • Guarantee terms, if you offer one. What’s covered, for how long, and what isn’t.
  • Access and communication. What you need from them to do the work, and how you’ll contact them.

One more thing I learned the hard way: if you offer more than one kind of service, each one needs its own scope and pre-existing conditions section. A customer booking one service shouldn’t be signing terms written for a different one.

I’m not a lawyer, and nothing here is legal advice. Liability limits, deposit forfeits and guarantee language are exactly the parts to have a lawyer in your state look at before you use them.

Get it signed on a phone, before the visit

Paper at the door works, but it’s the worst time to ask. The customer is standing there, you’re ready to start, and nobody reads anything. A link they open the night before is better. They can read it on the couch and sign with a finger.

Here is how it works in VentCRM:

  1. Every job gets its own private signing link when it’s created, whether the customer booked online or you entered the job yourself.
  2. Online bookings get the link in the confirmation email, with a line asking them to review and sign before you arrive. Their appointment page also shows a “Review & sign” card until it’s done.
  3. The signing page shows the job, the customer’s name and the scheduled time at the top, then the agreement for the service they booked. No account, no password.
  4. They type their email and draw their signature with a finger or a mouse, then tap “Sign and submit.”
  5. They get a confirmation email, and the page turns into a “signed” confirmation. If they open the link again later, it doesn’t ask them to sign twice.

On your side, the job shows either “Signed” with the date and time and a button to view the signature, or “Awaiting signature” with a copy-link button so you can text the link to someone who missed the email. Signing isn’t a hard block. An unsigned job still runs, it’s just flagged, so you can decide how to handle it.

Keep the exact wording each customer signed

This is the part most people skip, and it’s the part that matters most later. Your agreement will change. You’ll fix a sentence, tighten the cancellation rule, add a line after a strange job. If your system only stores “signed: yes” and always shows the current wording, then a customer from last spring now appears to have agreed to terms that didn’t exist yet.

So VentCRM saves the exact text of the agreement with each signature: the title, the intro and every section, as it stood the moment the customer signed. Along with it, it keeps the signature image, the signing time, the email they entered and the IP address when one is available. After that, changing your template never rewrites what a signed job shows.

That’s the record I’d want if I ever had to show what a customer actually agreed to. Whether it’s enough for any particular dispute is a question for a lawyer, not for me.

A printable version for paper signers

Some customers book by phone and never open an email. Some would just rather sign paper. For them, there’s a printable version of the agreement in the admin, laid out on US Letter with blank signature lines at the bottom, with a pick for each service line. Print it or save it as a PDF from the browser, keep a few in the truck, and hand one over before you start.

Mistakes I’d avoid

  • Writing a wall of legal text. Nobody reads it on a phone, and an agreement nobody read doesn’t help either of you. Short sections, one idea each.
  • Asking at the door. Send it with the confirmation so they have time to read it and ask questions.
  • One agreement for every service. Scope and pre-existing conditions are different for each kind of job.
  • Overwriting old terms. If you can’t show the wording a customer actually signed, the signature is worth a lot less.
  • Promising what you can’t back up. Don’t put a guarantee in writing that you haven’t thought through. Your photos help here too; I wrote about that in airflow readings and photo proof.

Your wording, set up for your business

The agreement text in my account is Vent Pro NYC’s own. Each operator’s wording is set up for their business and their services during setup, so your customers sign your terms, not mine. For the rest of the workflow around it, read what dryer vent cleaning software actually needs to do, check pricing, or see how customers move their own visits in letting customers reschedule online.

Try it yourself

You can click through jobs, bookings and the rest of the workflow in the free live demo. It runs a fictional company and needs no signup.

Common questions

Does a small home service business need a service agreement?
I think so. A short agreement signed before the visit covers scope, what you won’t do, cancellation and deposits, photos and any guarantee, so those questions are settled before the work instead of after. I’m not a lawyer, so have one review your wording.
What should a home service agreement include?
Scope of the work, what isn’t included and your right to refuse unsafe work, pre-existing conditions, pricing and add-ons, your cancellation and deposit rule, how you use photos, guarantee terms if you offer one, and how you’ll communicate.
Can customers sign a service agreement on their phone in VentCRM?
Yes. Each job has a private signing link. The customer opens it, reads the agreement for the service they booked, enters their email and signs with a finger. No account is needed.
What happens if I change my agreement later?
VentCRM saves the exact wording with each signature, so a signed job keeps showing what that customer agreed to. Only unsigned jobs pick up your new wording.
What if a customer won’t sign online?
There’s a printable version of the agreement in the admin with blank signature lines, so you can hand them paper before you start. An unsigned job isn’t blocked; it’s flagged on the job so you can follow up.

Get your own VentCRM

Sign up online in a few minutes — no sales call. Pay the $750 setup and first month, then $129/month, no contract. Tell me about your business and I’ll email you when your system is ready. Want to look first? Open the live demo — you’re signed in automatically, no email asked.

Talk to Eyal

Rather talk before you pay? Call or text me at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

VentCRM is operated by Vent Pro NYC, Inc. That’s the name you’ll see on the secure Stripe checkout page.

Questions about the app or signing in? Customer service: call or text the owner at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

Keep reading