Sales Tax on Home Service Invoices: How I Set It Up

Sales tax on a service invoice depends on what you did and where the job was. Here’s how I set mine up across New York and New Jersey, and what to ask your accountant.

By , owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 20, 2026

Sales tax on home service invoices depends on two things: which services your state taxes, and where the job is, not where your business is. If you work across a state line, the same cleaning can carry a different tax rate on each side. The practical setup is to mark each line item taxable or not, and pick the rate from the service address. Then have an accountant confirm the rules for your services, because I can’t do that for you.

I’m Eyal Malka. I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn, and I built VentCRM to run it. We work in New York and New Jersey, so I had to get this right on invoices in both. Here’s how I think about it and how the software handles it. This is not tax advice. It’s how one small operator set up his invoices.

Do home services get charged sales tax?

Sometimes. States differ a lot on this. Some tax most services, some tax only certain ones, and some tax almost none. Within a state, the answer can change based on what exactly you did: cleaning, repair, installation, or a part you sold. Rules also change over time.

So I won’t tell you whether your service is taxable. I’ll tell you what to ask your accountant, and how to set up your invoices so that whatever the answer is, the software applies it the same way every time.

The questions I’d bring to an accountant:

  • Which of my services are taxable in each state I work in?
  • Are parts or products I sell taxed differently from my labor?
  • Is a trip charge or service-call fee taxable on its own?
  • Which address decides the rate: the customer’s billing address or the property where I did the work?
  • Do I need to register to collect tax in a second state, and how often do I file?

Which address sets the tax rate?

For work done at a property, the rate generally follows the property, not your shop and not the customer’s mailing address. Confirm that for your state, but that’s how I’ve set up VentCRM.

This matters more than it sounds. Plenty of people own a place in one state and get their mail in another. If the rate comes from the billing address, a job at a New Jersey house billed to a Manhattan apartment would get New York’s rate. That’s wrong on the invoice and wrong on your filing.

How VentCRM figures sales tax

Every invoice and quote has one tax rate and a taxable switch on each line item. Here’s how they get set:

  1. The rate comes from the service property’s state. When you start an invoice for a job, VentCRM looks at the property and fills in the rate. Today the built-in table has the two states I work in: New York at 8.875% (the New York City combined rate) and New Jersey at 6.625%. Any other state, or a property with no state on file, defaults to the New York rate, so if you work elsewhere you’ll want to check that number.
  2. You can always change it. The rate is a plain field on the invoice. If a job needs a different rate, type it in. The tax line recalculates as you go.
  3. Each line is taxable or not. A checkbox in the Tax column on every line item. Catalog items carry a default, so a service you’ve marked non-taxable comes in that way every time. Tax is only figured on the lines that are checked.
  4. Service-call fees come in untaxed. When an invoice is built from a job titled as a service call, that line starts out non-taxable. Change it if your state says otherwise.

The same rate logic runs wherever an invoice gets built. That includes the add-ons you sell on the phone at the job, which I wrote about in selling add-on services on site, and quotes, so the number the customer approves is the number they get billed.

Should quotes include sales tax?

I think they should, for any job big enough to quote. A customer who approves a number and then sees a bigger one on the invoice feels misled, even if the difference is just tax. In VentCRM, a new quote picks its rate from the property’s state the same way an invoice does, and each line has the same taxable checkbox. When the approved quote becomes an invoice, the rate carries over with it, so the tax on the invoice matches the tax the customer already saw.

If you quote with tiered options, the same applies to each tier. I wrote about that style of quote in good, better, best pricing for home services.

What does the customer see?

On the invoice and on the payment page, the customer sees the line items, a tax line when there is tax, any discount, and the total. If they paid a booking deposit, it shows under “Paid to date” and comes off the balance due.

Tips are separate. A tip the customer adds when paying by card is its own amount on top of the invoice. It isn’t a line item, so no tax is figured on it. More on that in accepting tips in a home service business.

A detail to watch: discounts

In VentCRM, a dollar discount on an invoice comes off the total after tax is calculated. Some states expect a discount to lower the taxable amount instead. If that’s your case, ask your accountant how they want it handled. One simple option is to lower the line item’s price rather than using the discount field.

Getting the numbers to your accountant

At filing time, your accountant needs to know how much tax you collected, and often where. The invoices list exports to a CSV with each invoice’s service address and state, the pre-tax total, the tax rate, the tax amount and the total. Filter by date, export, and send the file. Splitting New York from New Jersey is a sort on the service state column.

I’d still ask the accountant what report they want before the first filing, not after. It’s a five-minute question that saves a scramble later.

Mistakes I’d avoid

  • One rate for everything. If you cross a state line, a single hardcoded rate will be wrong on some of your invoices.
  • Using the billing address. The property is where the work happened. Use it.
  • Adding tax by hand at the end. Doing the math on a calculator in the customer’s kitchen is how you get rounding errors and an invoice that doesn’t match your filing.
  • Quoting prices that hide the tax. If your advertised price is before tax, say so. A surprise line at the bottom of the invoice reads like an upsell, even when it’s the law.
  • Guessing. If you’re not sure whether a service is taxable, ask before you invoice a season’s worth of jobs the wrong way.

Try it yourself

You can build an invoice and watch the tax line move in the free live demo, which runs a fictional company and needs no signup. For the rest of the payment side, read on-site invoicing for home service businesses, or compare options on the comparison page.

Common questions

Do I charge sales tax on home services?
It depends on your state and the service. Some states tax many services and some tax very few. Ask an accountant which of your services are taxable where you work.
Which address decides the sales tax rate on a service invoice?
For work at a property, the rate generally follows the property, not your shop or the customer’s billing address. Confirm that for your state. VentCRM picks the rate from the service property’s state.
What rates does VentCRM fill in?
New York at 8.875% and New Jersey at 6.625%. Any other or missing state defaults to the New York rate, and you can type a different rate on any invoice.
Can some line items be non-taxable?
Yes. Every line item has its own taxable checkbox, and catalog items carry a default. Tax is only figured on the checked lines.
How do I give my accountant the sales tax numbers?
Export the invoices list to CSV. It includes the service address and state, pre-tax total, tax rate, tax amount and total for each invoice.

Get your own VentCRM

Sign up online in a few minutes — no sales call. Pay the $750 setup and first month, then $129/month, no contract. Tell me about your business and I’ll email you when your system is ready. Want to look first? Open the live demo — you’re signed in automatically, no email asked.

Talk to Eyal

Rather talk before you pay? Call or text me at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

VentCRM is operated by Vent Pro NYC, Inc. That’s the name you’ll see on the secure Stripe checkout page.

Questions about the app or signing in? Customer service: call or text the owner at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

Keep reading