Route Planning for Service Businesses: My Daily Routine
Every morning comes down to one choice: drive the day in the order you promised, or the order that saves the most driving. Here’s how I decide and what the route tools do.
By Eyal Malka, owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 20, 2026
Route planning for service businesses comes down to one decision you make every morning: drive the day in the order you promised customers, or in the order that saves the most driving. Most days you keep the appointment order and just need real drive times between stops. On a loose day, letting software reorder the stops can save a lot of time in traffic. Either way, the plan should hand off to your navigation app in one tap.
I’m Eyal Malka. I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn, and I built VentCRM to run it. Driving in New York is its own job, so here’s how I think about a day’s route and what the route tools in the app actually do.
Why does route planning matter for a small crew?
Because drive time is unpaid time. A dryer vent cleaning takes about as long whether the next stop is three blocks away or across the borough. The difference is what you burn getting there: gas, tolls, parking, and the hour you could have spent on another job or at home.
I’m not going to tell you a route tool saves some fixed percentage of miles. It depends on how spread out your jobs are, and in the city, traffic matters more than distance. Two stops a mile apart can be five minutes or forty. What helps is seeing the real drive times before you leave, so the day you planned is a day you can actually drive.
Should you drive in appointment order or shortest-drive order?
Usually appointment order. You told a customer 11 AM, and they arranged their day around it. A route that saves twelve minutes of driving but has you showing up an hour late isn’t a better route.
Shortest-drive order earns its place on days where the times are loose: a block of jobs that are all “sometime this afternoon,” a day of follow-ups, or building visits where the super just needs you before 3. That’s when letting the software reorder the stops is worth it.
The best place to plan routes, though, is before the day exists. When a customer books, the visit holds a time window that covers the work and the drive to the next stop. At Vent Pro NYC that’s 90 minutes for a dryer vent visit. That window is what keeps the day drivable without anyone redoing it in the morning.
How the route bar works in VentCRM
On the phone’s Schedule screen, the Day view has a route card at the top showing the day’s remaining stops. Finished and canceled visits drop off it, so as the day goes on it only shows where you still need to go.
- Time order is the default. Stops are listed in appointment order, with each stop’s time and address.
- Under each stop after the first, you see the drive time and distance from the previous stop, pulled from Mapbox using real roads and current traffic. The top of the card shows the total driving between stops.
- Tap Shortest drive and Mapbox reorders the stops for the least driving from the shop, again with live traffic. The card reminds you to double-check that the new order still fits your appointment times, because it doesn’t look at them.
- Tap Start navigation and Google Maps opens with all the stops loaded as waypoints, in whichever order you picked. Turn-by-turn is Google’s job; you don’t pay extra for it.
If Mapbox can’t answer, the route card doesn’t break. Time order stays as it is, just without drive times. Shortest drive falls back to a simple straight-line ordering from the shop. Navigation works either way. Drive times are also remembered for the session, so flipping between the two orders doesn’t keep asking Mapbox for the same answer.
There are limits worth knowing. The shortest-drive reorder handles up to 11 stops in a day, and drive times work for up to 25. Past those numbers, you get the same fallback as above: no drive times, and a straight-line order if you asked for the shortest drive. For a one- or two-truck dryer vent company, I haven’t come close.
What the map view shows
The Schedule screen also has a Map view. Every visit of the day is a pin. The stops still ahead are numbered 1, 2, 3 in appointment order and joined by the actual driving line. Finished visits stay on the map as muted check-mark pins, so you can see the shape of the day. Tap a pin and you’re on that job.
When someone on the crew taps “On my way,” their live position shows up as a dot on the same map. I wrote about that, and what the customer sees on their end, in on my way texts to customers.
Why addresses need coordinates
None of this works on a typed address alone. A map needs latitude and longitude for every stop. Getting those is called geocoding, and if you have to do it by hand, you won’t.
VentCRM does it in the background. When a property is saved, the app tries to look up its coordinates right away. A scheduled job runs every 15 minutes and fills in any property that’s still missing them. And if a brand-new address shows up on today’s map before that has happened, the map looks it up on the spot so the stop still gets a pin. Addresses booked online come in through an autocomplete, so they tend to be clean from the start.
If an address can’t be located at all, that stop still appears in the route list in its time slot. It just won’t get a drive time until the address is fixed.
How I plan a day, in practice
- Night before: look at tomorrow in Day view. If the total driving looks wrong, it usually means one job is far out of the way. That’s a call to the customer, not a software problem.
- Morning: open the route card, leave it on Time order, and tap Start navigation.
- When a job cancels: it drops off the route. If the rest of the day has flexible times, try Shortest drive and see if it’s worth calling anyone to move up.
- Running late: the drive time to the next stop tells you what to put in the on-my-way text, so you’re not guessing.
Mistakes I’d avoid
- Optimizing away your promises. A shorter route that breaks appointment times costs more in trust than it saves in gas.
- Booking back-to-back with no travel time. If your booking page offers 10:00 and 10:30 to two different neighborhoods, no route tool can fix that day. Build the travel into the visit window.
- Trusting straight-line distance in a city. A bridge or a one-way street makes “close” meaningless. Use drive times with traffic.
- Paying for a separate routing app. If your job software already knows the stops, retyping them into another tool every morning is a waste of time and money.
Try it yourself
The schedule, map and route tools are all in the free live demo, running a fictional company with no signup. For how the booking page keeps days drivable in the first place, read online booking for a home service business. To see everything else that comes with it, check dryer vent cleaning software or pricing.
Common questions
- Should I route my day by appointment time or by shortest drive?
- Usually by appointment time, since customers planned around it. Reorder for the shortest drive on days where the times are flexible, then check the new order still fits your promises.
- Where do VentCRM’s drive times come from?
- From Mapbox, using real roads and current traffic. Each stop shows the drive time and distance from the previous one, plus a total for the day.
- Does VentCRM do turn-by-turn navigation?
- It hands off to Google Maps. Tapping Start navigation opens Google Maps with all of the day’s remaining stops loaded as waypoints, in the order you picked.
- Do I have to enter coordinates for each address?
- No. Properties are geocoded when they’re saved, a background job fills in any that are missing every 15 minutes, and the map looks up brand-new addresses on the spot.
- How many stops can the route optimizer handle?
- The shortest-drive reorder handles up to 11 stops, and drive times work for up to 25. Past that, the route shows no drive times and uses a simple straight-line order for the shortest-drive option.