On My Way Texts to Customers, With Live Tracking

Most “where are you?” calls come from customers who simply don’t know anything. Here’s how I send one-tap ETA texts with a live map link, and where the limits are.

By , owner of Vent Pro NYC (12 years in the trade) and builder of VentCRM · Updated November 20, 2026

An “on my way” text to customers is a short message you send when you leave for their job: who you are, roughly how many minutes out you are, and a way to reach you. Add a link to a live map and most “where are you?” calls stop before they start. The rules are simple: send it when you actually leave, give an honest ETA, and only text customers who agreed to hear from you.

I’m Eyal Malka. I run Vent Pro NYC, a family-owned dryer vent cleaning company in Brooklyn, and I built VentCRM to run it. Here is how I handle the drive to the job, and how the system does it.

Why the “where are you?” call happens

Customers don’t call because they’re impatient. They call because they don’t know anything. They took a morning off, they’re holding the dog, they want to know if they have time to run to the store. A two-hour arrival window with no update feels longer than it is.

For a small shop, those calls cost twice. You can’t answer while you drive, so you call back at a red light or not at all, and the customer gets more anxious. I’m not going to quote you a number for how many calls an ETA text prevents. I haven’t measured it and I don’t trust the figures people throw around. What I can tell you is that a customer who knows you’re 20 minutes out has nothing to call about.

When to send an on my way text

When you’re actually in the van and pulling out. Not when you’re finishing the job before, not when you think you’ll leave soon. A few habits that help:

  • Send it as you leave, so the clock in the text matches reality.
  • Round the ETA up, not down. Ten minutes early is a nice surprise. Ten minutes late is a phone call.
  • Ask for access notes in the same text: gate code, buzzer, which door, the dog.
  • If you’re running late after sending it, send a new one. Don’t let the old ETA stand.

What should the text say?

Keep it short. Business name first, then the facts:

  • Your business name.
  • That the technician is on the way.
  • About how many minutes.
  • A link to follow along, if you have one.
  • The address you’re heading to, so they can catch a mistake.
  • An invitation to reply with access notes.

For example: “Your Company: your technician is on the way! ETA about 20 min. Follow your technician live: [link] We will see you at 12 Main St shortly. Reply with any access notes (gate code, dog, etc).” That’s close to what my own customers get.

How it works in VentCRM

I wanted this to be one tap from the job on my phone, with no typing while I’m about to drive. So it is:

  1. Open the visit on your phone and tap On my way.
  2. Pick an ETA from the list: 5, 10, 15, 20, 25, 30, 40, 45, 50, 60, 75 or 90 minutes.
  3. The customer gets the text with the ETA and a link to a live tracking page. The job moves from scheduled to in progress at the same time, so your schedule shows you’re on it.
  4. If you’re in a dead zone when you tap it, the request is queued on the phone and the text goes out when you’re back online. You see a note saying it was queued, so you know it didn’t vanish.

The text only goes to customers who haven’t opted out. If a customer replied STOP, the button tells you the text didn’t go, and live tracking doesn’t start for nobody.

What the customer sees on the live tracking page

The link opens a page with a map showing the customer’s address and where the technician is. While you drive, it says “Arriving in about N min” with a clock time next to it, and when the location was last updated. The page checks for a new position every 10 seconds, and the drive time is refreshed from live driving directions about once a minute, so the estimate isn’t frozen at whatever you picked when you left.

Tracking ends on its own. You don’t have to remember to turn it off:

  • When you get within about 150 meters of the address, the page switches to “Your technician has arrived.”
  • When the visit is completed, the page says the visit is complete.
  • After 3 hours, tracking switches itself off wherever the phone is.

Once tracking ends, the technician’s position isn’t shown anymore. The customer gets to see you coming to their house, not where you go for lunch afterward. I think that matters for the people who work for you as much as for the customer.

The honest limit: iPhone web apps

VentCRM runs as a web app on your phone. On iPhone, a web app can’t send its location in the background. So location is only shared while the visit screen is open. The screen tells you to keep it open while you drive, and it keeps the phone from dimming while it’s sharing. Put the phone in a dash mount on that screen and you’re fine.

If you switch to another app, the customer’s page doesn’t go blank or lie. After a few minutes without a new position it says the live location is paused and shows when you were last seen, along with the ETA. If you turned location off for the app entirely, the customer still gets the ETA text, just without the moving dot, and your screen tells you how to turn it back on.

Seeing your crew on the schedule map

If you have more than one truck, the owner’s side matters too. The schedule has a map view, and anyone who tapped On my way on one of the jobs shown and is sharing location appears on it as a live dot. It refreshes while you have the page open. That’s usually enough to answer “is he close?” when a customer does call the office, without calling the technician while he drives.

Do I need permission to send on my way texts?

Treat it as yes. Only text customers who agreed to receive texts from your business, and honor STOP for good. A text about an appointment they booked is about as welcome as a business text gets, but consent still comes first. At Vent Pro NYC our business texting is registered and opt-in only.

I’m not a lawyer, and the rules depend on your carrier, your messaging provider and where you operate. Check with them, and with counsel if you’re unsure. The background on getting our texts registered and delivering is in A2P 10DLC texting for home service businesses.

Mistakes that make ETA texts backfire

  • Sending it too early. An ETA you blow by 30 minutes is worse than no text. Send it when the wheels turn.
  • Typing it by hand at a red light. It’s unsafe and it leads to typos in the address and time. One tap before you pull out is the whole point.
  • Tracking that never ends. Customers don’t need to see you after you arrive, and your crew shouldn’t be on a map all day. Make sure it stops.
  • Ignoring the replies. If you ask for access notes, someone has to read them before the tech rings the wrong buzzer.

The drive is only one part of the day. If you want the end of the visit to go as smoothly, read how I get paid on site, and the follow-up that keeps those customers coming back, annual service reminders.

Try it yourself

You can click through the visit screen, the schedule map and the rest of the workflow in the free live demo. It runs a fictional company and needs no signup. For how this fits into a full day in the trade, read what dryer vent cleaning software actually needs to do, or check pricing.

Common questions

When should I send an on my way text to a customer?
When you actually leave for the job. Round the ETA up, and if you end up running late, send a new one instead of letting the old ETA stand.
What ETA options does VentCRM offer?
Tap On my way on the visit and pick 5, 10, 15, 20, 25, 30, 40, 45, 50, 60, 75 or 90 minutes. The customer gets a text with the ETA and a link to a live tracking page.
When does live tracking stop?
When the technician is within about 150 meters of the address, when the visit is completed, or after 3 hours, whichever comes first. After that the technician’s position is no longer shown.
Does live tracking work with the phone in my pocket?
Not on iPhone. VentCRM is a web app, and an iPhone web app can only share location while it’s on screen. Keep the visit screen open while you drive; the customer’s page shows the location as paused if updates stop.
Do I need customer consent to send ETA texts?
Treat it as yes: only text customers who agreed to receive texts, and honor STOP. VentCRM won’t send the text to a customer who opted out. Rules vary, so check with your messaging provider and counsel.

Get your own VentCRM

Sign up online in a few minutes — no sales call. Pay the $750 setup and first month, then $129/month, no contract. Tell me about your business and I’ll email you when your system is ready. Want to look first? Open the live demo — you’re signed in automatically, no email asked.

Talk to Eyal

Rather talk before you pay? Call or text me at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

VentCRM is operated by Vent Pro NYC, Inc. That’s the name you’ll see on the secure Stripe checkout page.

Questions about the app or signing in? Customer service: call or text the owner at (718) 541-5567, Sunday–Friday, 9 AM–5 PM (Eastern).

Keep reading